Recall You Later

Recall directory / Kenworth / T270

Model-level recall history

Kenworth T270 recalls by year

Explore official NHTSA model-level records from 2007 through 2023. Choose a year to review consequences, remedies, campaign numbers, and instructions for that year and model.

74NHTSA recall records
28unique campaigns
17model years represented

Year-by-year record count

Recall history across model years

20231 record20222 records20212 records20206 records20196 records20187 records20173 records20165 records20155 records20147 records20136 records20125 records20115 records20104 records20094 records20085 records20071 record

Affected systems

Frequently represented components

Component counts describe records in the NHTSA dataset, not failure rates.

Electronic stability control (esc)13 records across 1 unique campaign
Service brakes, air: Antilock: Abs warning light13 records across 1 unique campaign
Visibility: Windshield wiper/washer: Motor6 records across 1 unique campaign
Fuel system, diesel: Fuel injection system: Fuel rail4 records across 1 unique campaign
Engine and engine cooling: Engine: Diesel3 records across 1 unique campaign
Steering3 records across 2 unique campaigns
Steering: Critical fasteners3 records across 1 unique campaign
Fuel system, diesel: Delivery: Hoses, lines/piping, and fittings2 records across 1 unique campaign
Fuel system, other: Delivery: Hoses, lines/piping, and fittings2 records across 1 unique campaign
Power train: Clutch assembly2 records across 1 unique campaign
Seat belts2 records across 2 unique campaigns
Service brakes, air: Supply: Check valve2 records across 1 unique campaign
Service brakes, air: Supply: Hoses, lines/piping, and fittings2 records across 1 unique campaign
Service brakes, hydraulic2 records across 1 unique campaign
Electrical system: Ignition: Switch1 records across 1 unique campaign
Electrical system: Wiring1 records across 1 unique campaign
Equipment: Electrical1 records across 1 unique campaign
Exterior lighting: Tail lights1 records across 1 unique campaign
Fuel system, diesel1 records across 1 unique campaign
Parking brake: Conventional: Air1 records across 1 unique campaign
Power train: Axle assembly1 records across 1 unique campaign
Power train: Axle hubs1 records across 1 unique campaign
Service brakes, air1 records across 1 unique campaign
Service brakes, air: Controls: Foot control/valve1 records across 1 unique campaign

Campaign history

Recently reported Kenworth T270 campaigns

Campaigns are grouped across the model years represented on this page.

22V54700007/28/2022

PACCAR Incorporated (PACCAR) is recalling certain 2022-2023 Kenworth T170, T270, T280, T370, T380, T440, T470, T480, T680, T800, T880, W900, W990, C500, and 2022-2023 Peterbilt 325, 330, 337, 348, 365, 367, 389, 520, 536, 537, 548, 567, and 579 vehicles. The steering gears may have been assembled incorrectly, which can cause the gears to fracture.

Model years in this history: 2023, 2022

Consequence and remedy

Consequence

A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

Remedy

Dealers will inspect the steering gear serial numbers, and replace the steering gears as necessary, free of charge. Owner notification letters were mailed September 26, 2022. Owners may contact Kenworth's customer service at 1-425-828-5888 and Peterbilt's customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22PBE and 22KWE.

22V27700004/25/2022

PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.

Model years in this history: 2020, 2019, 2018

Consequence and remedy

Consequence

Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.

Remedy

Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

21V00N00012/29/2021

PACCAR Incorporated (PACCAR) is recalling certain 2016-2022 Peterbilt 567, 579, 2021-2022 Peterbilt 536, 2017-2021 Kenworth T880, 2016-2022 Kenworth T680, 2018-2020 Kenworth T440, 2020 Kenworth T270, and 2021 Kenworth T280 vehicles. The methane detection system will not function if the system loses power.

Model years in this history: 2020

Consequence and remedy

Consequence

The operator may be unaware of a system malfunction or the presence of excessive methane levels, increasing the risk of injury or fire.

Remedy

Dealers will re-wire the warning alarm, free of charge. Owner notification letters were mailed December 1, 2022. Owners may contact Peterbilt customer service at 1-940-591-4220, and Kenworth customer service at 1-425-828-5888. PACCAR's numbers for this recall are 21KWH and 21PBN.

21V60100008/03/2021

PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Peterbilt 536, 537, 548 and Kenworth T270, T280, T370, T380, T440, T470, and T480 vehicles equipped with Cummins L9 diesel engines. A fuel leak may occur from the fuel hose between the fuel pump and the remote fuel filter head.

Model years in this history: 2022, 2021

Consequence and remedy

Consequence

A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy

Cummins will replace the fuel hoses, free of charge. Owner notification letters are expected to be mailed in October 2021. Owners may contact PACCAR's customer service at 1-425-828-5888 (Kenworth) and 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21PBG and 21KWF.

21V39100005/26/2021

PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.

Model years in this history: 2021, 2020, 2019, 2018

Consequence and remedy

Consequence

A fuel leak in the presence of an ignition source increases the risk of a fire.

Remedy

Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

20V19900004/06/2020

PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."

Model years in this history: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008

Consequence and remedy

Consequence

If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.

Remedy

PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.

19V60600008/16/2019

PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T270 and T370 vehicles. The brake treadle valves may have loose compression fittings, which can cause the air supply hose to separate from the valve.

Model years in this history: 2020

Consequence and remedy

Consequence

A separated hose may cause reduced braking ability, increasing the risk of a crash.

Remedy

PACCAR will notify owners, and dealers will inspect the brake treadle valve hose connections for loose compression fittings, tightening them as necessary, free of charge. The recall began September 30, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. PACCAR's number for this recall is 19KWD.

18V93100012/21/2018

PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Model years in this history: 2019, 2018

Consequence and remedy

Consequence

Unintended movement of a vehicle can increase the risk of a crash.

Remedy

PACCAR will notify owners, and dealers will update the transmission control module, free of charge. The recall began February 23, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's numbers for this recall are 18PBE and 18KWH.

18V35900005/31/2018

PACCAR Incorporated (PACCAR) is recalling certain 2019 Kenworth T270 and T370 vehicles. The rear hub axle nut on these vehicles may have been over tightened, possibly causing bearing failure or a fire.

Model years in this history: 2019

Consequence and remedy

Consequence

Bearing failure can cause wheel separation, increasing the risk of crash.

Remedy

PACCAR will notify owners, and dealers will disassemble the rear hub assembly, and install new bearings and re-assemble the hub, free of charge. The recall began June 22, 2018. Owners may contact PACCAR customer service at 1-918-259-3258. PACCAR's number for this recall is 18KWC.

18V30800005/11/2018

PACCAR Incorporated (PACCAR) is recalling certain 2018 Kenworth T270 trucks. The outer spindle nut of the front wheel hub assembly may have been incorrectly installed possibly causing bearing failure.

Model years in this history: 2018

Consequence and remedy

Consequence

Front wheel bearing failure can lead to front wheel separation, increasing the risk of a crash.

Remedy

PACCAR has notified owners, and dealers have inspected the hub assembly and corrected the installations, free of charge. The recall began April 26, 2018. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 18KWB.

17V59300009/22/2017

PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.

Model years in this history: 2016

Consequence and remedy

Consequence

If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.

Remedy

PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 13, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000 or Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is P817-C.

16V80300011/04/2016

PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth K370, T270, T370, T440, T660, T800 trucks manufactured February 2, 2016, to October 13, 2016, and Peterbilt 330, 337, 348, 367, 389, 567, and 579 trucks manufactured March 7, 2016, to October 5, 2016. The affected vehicles are equipped with certain Goodyear LHS Load Range G tires, size 295/75R22.5 G399A, that due to incomplete adhesion, have a tire tread that may partially separate.

Model years in this history: 2017

Consequence and remedy

Consequence

A partial tread separation may increase the risk of a crash.

Remedy

Goodyear will notify the owners of the affected Peterbilt and Kenworth vehicles and Goodyear dealers will replace the affected tires, free of charge. The recall began on December 14, 2016. To find a Goodyear dealer, owners should contact Goodyear Consumer Relations at 1-800-592-3267. Consumers may also contact Kenworth customer service at 1-425-828-5000 and Peterbilt customer service at 1-940-591-4000. PACCAR's number for this recall is 1016G (PB) (Peterbilt), and 16KWC (Kenworth).

15V27100005/08/2015

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.

Model years in this history: 2016, 2015, 2014, 2013, 2012, 2011

Consequence and remedy

Consequence

As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

Remedy

PACCAR is still developing and testing a remedy. The recall is expected to begin in July 2015. An interim letter was sent to owners on July 2, 2015. The recall began on September 2, 1015. Owners may contact Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is 15KWF.

14V81000012/29/2014

PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Peterbilt 367, 389, 567, 579, and 587 trucks manufactured from May 23, 2014, to February 13, 2015, and 2015 Kenworth T270, T370, T440, T470, T660, T680, T800, T880, and W900 trucks manufactured from May 23, 2014, to February 13, 2015, equipped with certain air brake actuators. The affected vehicles may experience brake drag due to an improperly seated diaphragm in the brake chamber.

Model years in this history: 2015

Consequence and remedy

Consequence

Brake drag may result in a wheel end fire.

Remedy

Kenworth and Peterbilt will notify owners, and dealers will inspect and replace the brake chamber, as necessary, free of charge. An interim notice was mailed to owners March 3, 2015. The recall began on May 14, 2015. Owners may contact PACCAR customer service at 1-425-828-5000 (Kenworth), or 1-940-591-4000 (Peterbilt). PACCAR's number for this recall is 14KWP (Kenworth), and 1214L (Peterbilt).

14V48600008/07/2014

PACCAR Incorporated (PACCAR) is recalling certain model year 2015 Kenworth K270, T270, K370, T370, T440, T470, and W900 chassis manufactured May 13, 2014, to July 23, 2014, and certain model year 2015 Peterbilt 210, 220, 320, 325, 330, 337, 348, 365, 382, 384, and 567 chassis manufactured May 8, 2014, to July 22, 2014. The Cummins ISB or ISL engines in these vehicles may have been equipped with Fleetguard UFF-XT fuel filters, part number FF63009, whose filter shell may separate from the fuel filter nut plate causing the engine to stall without warning.

Model years in this history: 2015

Consequence and remedy

Consequence

If the engine stalls unexpectedly there is an increased risk of a crash.

Remedy

Cummins will notify owners on behalf of PACCAR, and Cummins dealers will replace the fuel filter with a non-defective one, free of charge. The notification schedule for this recall ran July 29 to December 31, 2014. Owners may contact Kenworth customer service at 1-425-828-5000, or Peterbilt customer service at 1-940-591-4000. Owners may also contact Cummins customer service at 1-812-377-3713. Kenworth's number for this recall is 14KWJ. Peterbilt's number for this recall is 814-H.

14V01300001/24/2014

PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."

Model years in this history: 2014

Consequence and remedy

Consequence

If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

Remedy

PACCAR will notify owners, and dealers will inspect and replace the seat belt buckles, as necessary, free of charge. The recall began on March 31, 2014. Owners may contact PACCAR at 1-425-468-7400. Kenworth's number for this campaign is 14KWC. Peterbilt's number for this campaign is 114-B.

13V61200012/05/2013

PACCAR Incorporated (Paccar) is recalling certain model year 2014 Kenworth T170, T270, T370, T440, T470, T660, T680, T700, T800, T880, C500 and W900 trucks manufactured July 1, 2013 through September 17, 2013. In the affected vehicles, the plastic housing of the Stop/Tail/Turn (STT) lamp can shrink and allow the light bulb to fall out of the mounted retention ring. As such, the Stop/Tail/Turn light would not be illuminated, and the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 108 "Lamps, Reflective Devices, and Associated Equipment."

Model years in this history: 2014

Consequence and remedy

Consequence

If the stop/tail/turn light is not illuminated, the driver's intentions would not be communicated, which increases the risk of a crash.

Remedy

Kenworth will notify owners, and dealers will replace the defective STT lamps with new lamps. The recall began on February 4, 2014. Customers may contact Paccar at 1-425-468-7400. Kenworth's number for this recall is 13KWM.

13V22200005/28/2013

PACCAR is recalling certain model year 2014 Kenworth T170, T270, T370, T470, T660, T680, T800, T880, and W900 trucks manufactured May 6, 2013, through May 17, 2013; and model year 2014 Peterbilt 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, 389K, 567, 579 and 587 trucks manufactured May 1, 2013 through May 17, 2013. An internal defect in the ignition switch causes the starter to engage when a key is partially inserted, before the key is turned.

Model years in this history: 2014

Consequence and remedy

Consequence

Unintended engine startup could cause injury to a person working in the engine compartment. Vehicles with standard transmissions may experience unexpected movement, which may result in personal injury or a crash.

Remedy

PACCAR will notify owners, and dealers will replace affected ignition switches, free of charge. The recall began on June 14, 2013. Owners may contact Kenworth at 1-425-828-5000 or Peterbilt at 1-940-591-4000. Kenworth's recall campaign number is 13KWF. Peterbilt's recall campaign number is 0513-E.

13V08200003/06/2013

PACCAR is recalling certain model year 2014 Kenworth T270 and T370 trucks, manufactured from January 31, 2013, through February 4, 2013. The left hand seat belt floor pan reinforcement bracket was not positioned correctly during assembly. This could result in the failure of the seat belt anchor mounting.

Model years in this history: 2014

Consequence and remedy

Consequence

In the event of a crash, the failure in the seat belt anchor may increase the risk of injury.

Remedy

PACCAR will notify owners, and dealers will remove, reposition, and reinstall the reinforcement bracket free of charge. The recall began on April 15, 2013. Owners may contact Kenworth at 1-425-828-5000.

12V53000010/12/2012

Kenworth is recalling certain model year 2012 and 2013 T270 and T370 medium duty trucks built with Eaton Ultrashift transmissions between December 7, 2011, and April 6, 2012. The air harness from the treadle valve on the affected vehicles was routed in a manner that can cause the air brake lines to be pinched between the cab and the electronic clutch actuator of the Eaton Ultrashift transmission. Significant movement between the cab and transmission can cause progressive wear and an eventual leak in the air lines.

Model years in this history: 2013, 2012

Consequence and remedy

Consequence

Air lines which leak can cause reduced brake function, which may result in a crash.

Remedy

Kenworth will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 30, 2012. Owners may contact Kenworth at 1-425-828-5000.

12V45200009/12/2012

Geo. Heiser Body Company, Inc., (Geo. Heiser Body Company) is recalling certain model year 2006 International and 2010-2013 Fuso, Hino, International, Kenworth, and Peterbilt vehicles equipped with Sure Power battery separator devices. These devices may overheat.

Model years in this history: 2013

Consequence and remedy

Consequence

Overheating of the battery separator can result in smoke and possible fire.

Remedy

Geo. Heiser Body Company will notify owners and will replace the battery separators free of charge. The safety recall began on October 25, 2012. Owners may contact Geo. Heiser Body Company at 1-206-622-7985.

12V02600001/30/2012

PACCAR IS RECALLING CERTAIN MODEL YEAR 2012-2013 KENWORTH T170, T270, T370, T440, T470, T660, T700, T800, W900, AND PETERBILT 320, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, AND 587 VEHICLES, MANUFACTURED FROM JANUARY 31, 2011, THROUGH JANUARY 19, 2012, AND EQUIPPED WITH BENDIX ATR-6 ANTILOCK TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.

Model years in this history: 2013, 2012

Consequence and remedy

Consequence

UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. UNEXPECTED CONTINUOUS BRAKE APPLICATION CAN CAUSE THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH. ALSO, THE BRAKES MAY BE APPLIED WITHOUT ILLUMINATING THE BRAKE LIGHTS, FAILING TO GIVE PROPER WARNING TO OTHER DRIVERS.

Remedy

PACCAR WILL NOTIFY OWNERS, AND PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 10, 2012. OWNER MAY CONTACT KENWORTH AT 1-425-828-5440 AND PETERBILT AT 1-940-591-4196.

11V15700003/07/2011

PACCAR IS RECALLING CERTAIN MODEL YEAR 2011-2012 KENWORTH T270/370, T440/T470, T800, T660, W900 AND C500 VEHICLES MANUFACTURED BETWEEN OCTOBER 18, 2010, AND JANUARY 28, 2011. CERTAIN CAST IRON SLACK ADJUSTER HOUSINGS, WHICH TRANSMIT BRAKING FORCE FROM THE BRAKE CHAMBER PUSH ROD TO THE BRAKE CAM TUBE, MAY INCLUDE A FLOW NOTCH IN THE HANDLE PORTION OF THE HOUSING DUE TO AN ERROR DURING THE CASTING PROCESS. A FLOW NOTCH IN THE HANDLE PORTION MAY REDUCE THE EFFECTIVE CROSS SECTION STRUCTURE AND CAUSE THE SLACK ADJUSTER HOUSING TO FRACTURE.

Model years in this history: 2011

Consequence and remedy

Consequence

IF THE SLACK ADJUSTER HOUSING WERE TO FRACTURE, THE WHEEL BRAKE TO WHICH THE SLACK ADJUSTER HOUSING IS ATTACHED WOULD NO LONGER FUNCTION, WHICH COULD INCREASE VEHICLE STOPPING DISTANCES, AND IF MOUNTED ON THE STEER AXLE, COULD CAUSE THE VEHICLE TO PULL TO ONE SIDE DURING BRAKING, INCREASING THE RISK OF A CRASH.

Remedy

DEALERS WILL INSPECT AND REPLACE THE SLACK ADJUSTER HOUSING AS NECESSARY. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 30, 2011. OWNERS MAY CONTACT KENWORTH AT 425-828-5440.

10V21100005/10/2010

KENWORTH IS RECALLING CERTAIN MODEL YEAR 2011 T270, T370, AND T800 TRUCKS MANUFACTURED FROM JANUARY 28 THROUGH MARCH 19, 2010, EQUIPPED WITH DV-2 AIR GOVERNOR CONTAINING PART NUMBER G90-1070-2111111 ON THE T270/370 MODEL TRUCKS AND PART NUMBER G90-1070-11113111 ON THE T800 MODEL TRUCKS. THE DV-2 AIR GOVERNOR WAS MISASSEMBLED WITH A BLANK PLUG INSTEAD OF A BREATHER. WITHOUT THE BREATHER INSTALLED, THE AIR GOVERNOR MAY NOT BE ABLE TO DETECT THE LOSS OF AIR PRESSURE IN THE AIR SYSTEM DURING NORMAL USE. THIS CONDITION MAY RESULT IN THE SLOW ACTIVATION OF THE EMERGENCY SPRING BRAKES.

Model years in this history: 2011

Consequence and remedy

Consequence

ALTHOUGH THE OPERATOR IS WARNED OF LOW AIR PRESSURE BY AUDIBLE AND VISUAL LOW AIR PRESSURE WARNING ALARMS, A VEHICLE CRASH OR FIRE IS POSSIBLE IF THESE WARNINGS ARE NOT HEEDED.

Remedy

KENWORTH WILL NOTIFY OWNERS AND REPAIR THE VEHICLES BY REPLACING THE BLANK PLUG WITH A BREATHER AND INSPECT FOR PROPER FUNCTION FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JUNE 10, 2010. OWNERS MAY CONTACT KENWORTH AT 1-425-828-5440.

Choose your exact model year

Watch the vehicle you own.

Open its year-specific page, review the current records, and start a free model-level recall watch.

2023 Kenworth T2701 records2022 Kenworth T2702 records2021 Kenworth T2702 records2020 Kenworth T2706 records2019 Kenworth T2706 records2018 Kenworth T2707 records2017 Kenworth T2703 records2016 Kenworth T2705 records2015 Kenworth T2705 records2014 Kenworth T2707 records2013 Kenworth T2706 records2012 Kenworth T2705 records