NHTSA lists 4 model-level recall records for this year, make, and model. These records may apply to your vehicle; confirm your specific VIN with NHTSA or the manufacturer.
Recall records
Service brakes, hydraulic: Foundation components: Hoses, lines/piping, and fittings10/26/199494V211000
THE BRAKE LINES CAN CONTACT THE TRANSMISSION MOUNTING BRACKET OF THE FRAME SIDE RAIL. THE LINES CAN WEAR THROUGH RESULTING IN LOSS OF BRAKE FLUID, AND EVENTUAL LOSS OF HALF THE VEHICLE BRAKING SYSTEM.
Consequence
A LEAK IN THE HYDRAULIC BRAKE LINE WILL CAUSE A LOSS OF ONE HALF THE VEHICLE BRAKING SYSTEM AND EXTENDED BRAKING DISTANCES WHICH CAN RESULT IN AN ACCIDENT.
Remedy
DEALERS WILL INSPECT FOR PROPER BRAKE LINE CLEARANCE AND REPOSITION THE BRAKE LINES. BRAKE LINES FOUND TO HAVE INDENTATIONS WILL BE REPLACED.
SYSTEM: BRAKES; HYDRAULIC; LINES; NON-METALLIC.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED FREE OF CHARGE WITHIN A REASONABLE TIME OR THE REMEDY DOES NOT CORRECT THE DEFECT, PLEASE CONTACT OLDSMOBILE AT 1-800-442-6537. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Seat belts: Front: Anchorage09/15/199595V173000
THESE VEHICLES WERE ASSEMBLED WITH REAR OUTBOARD SAFETY BELT ANCHORAGES THAT MAY NOT WITHSTAND THE REQUIRED LOAD. THIS DOES NOT COMPLY WITH FMVSS NO.210, "SEAT BELT ASSEMBLY ANCHORAGES."
Consequence
CONSEQUENCE OF NON-COMPLIANCE: IN A COLLISON, STRESS CAN CAUSE THE ATTACHMENT METAL TO TEAR AND ALLOW THE ANCHORAGE TO SEPARATE FROM THE BODY OF THE VEHICLE. THE SAFETY BELT MAY NOT PROTECT AN OCCUPANT IN THE EVENT OF A VEHICLE CRASH.
Remedy
DEALERS WILL REPLACE THE EXISTING ANCHOR BOLTS WITH A NEW SHOULDER BOLT AND THREAD LOCKING ADHESIVE. ADDITIONALLY, NOISE CONTROL PATCHES WILL BE APPLIED AT EACH ANCHORAGE.
SYSTEM: INTERIOR; ACTIVE RESTRAINTS; BELT ANCHOR AND ATTACHMENT; FMVSS NO.210.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT BUICK AT 1-800-521-7300; CHEVROLET AT 1-800-222-1020; PONTIAC AT 1-800-762-2737; OR OLDSMOBILE AT 1-800-442-6537. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Service brakes, hydraulic: Foundation components: Hoses, lines/piping, and fittings07/21/199393V121000
THE BRAKE HOSES WERE MANUFACTURED INCORRECTLY, AND DO NOT COMPLY WITH FMVSS 106, "BRAKE HOSES."
Consequence
THE IMPROPERLY MANUFACTURED BRAKE HOSES CAN CAUSEREDUCED BRAKE EFFECTIVENESS AND/OR UNEVEN BRAKING, WHICH COULD RESULT IN ANACCIDENT.
Remedy
REPLACE THE RIGHT FRONT BRAKE HOSE ASSEMBLY ON CIERA AND CENTURY MODELS, AND BOTH REAR BRAKE HOSES ON CAVALIER AND SUNBIRD MODELS.
SYSTEM: BRAKES; HYDRAULIC; HOSE.VEHICLE DESCRIPTION: PASSENGER VEHICLES.NOTE: IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED SERVICEDATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME WITHOUT CHARGE ORTHE REMEDY DOES NOT CORRECT THE SAFETY-RELATED DEFECT OR NONCOMPLIANCE, PLEASECONTACT THE APPROPRIATE SERVICE CENTER ( BUICK AT 1-800-458-8006, PONTIAC AT1-800-763-2737; OLDSMOBILE AT 1-800-442-6537; OR CHEVROLET AT 1-800-222-1020 ).ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETYHOTLINE AT 1-800-424-9393.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Seats03/09/199393V035000
THE DRIVER AND PASSENGER FRONT SEAT MANUAL RECLINING MECHANISMS DO NOT COMPLY WITH THE REQUIREMENTS OF FMVSS 207, "SEATING SYSTEMS." THE SEAT BACK MECHANISMS WILL NOT LATCH UNDER CERTAIN CONDITIONS.
Consequence
THE SEATS MAY RECLINE WITHOUT PRIOR WARNING, RESULTINGIN A HAZARD TO SEAT OCCUPANTS AND POSSIBLE LOSS OF VEHICLE CONTROL.
Remedy
REPLACE THE MANUAL SEAT RECLINER MECHANISM WITH A MECHANISM THAT COMPLIES WITH FMVSS 207.
