NHTSA lists 3 model-level recall records for this year, make, and model. These records may apply to your vehicle; confirm your specific VIN with NHTSA or the manufacturer.
Recall records
Suspension07/25/199696V124001
THE EQUALIZING BEAM SHAFT OF THE TANDEM AXLE SUSPENSION WERE MANUFACTURED FROM AS-ROLLED SAE4140 STEEL RATHER THAN THE SPECIFIED ANNEALED SAE4140. THESE SHAFTS CAN FRACTURE INSIDE THE BEAM AT THE TOE OF THE WELD.
Consequence
VEHICLES ARE SUBJECT TO VEHICLE TILT AND POSSIBLE ROLLOVER IN THE EVENT THAT BOTH EQUALIZING BEAMS, ON THE SAME SIDE OF THE VEHICLE, EXPERIENCE A SIMULTANEOUS SHAFT FAILURE. AFFECTED SUSPENSIONS CAN ALSO DROP AND CONTACT THE ROAD SURFACE GENERATING SPARKS WHICH COULD IGNITE FLAMMABLE MATERIAL.
Remedy
OWNER NOTIFICATION IS BEING CONDUCTED BY NEWAY ANCHORLOK. DEALERS WILL INSPECT AND REPLACE ALL SUSPENSION SUSPENSION BEAMS WITH SUSPENSION BEAMS CONTAINING APPROPRIATE SHAFTS.
OWNER NOTIFICATION:OWNER NOTIFICATION IS BEING CONDUCTED BY NEWAY ANCHORLOK AND BEGAN JULY 18, 1996.NOTE:OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDYWITHIN A REASONABLE TIME SHOULD CONTACT NEWAY AT 1-800-237-8932.ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Engine and engine cooling: Engine: Diesel06/23/199999V187001
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH CATERPILLAR 3116 MECHANICALLY UNIT INJECTED DIESEL ENGINES. THE GOVERNOR OF THE ENGINE CONTROLS THE UNIT INJECTOR FUELING BY WAY OF A CONTROL ASSEMBLY. IN THIS ASSEMBLY, A LINK TO THE GOVERNOR IS JOINED TO THE CONTROL ROD USING A RIVET. THIS RIVET CAN LOOSEN AND THEN WEAR RESULTING IN ENGINE SPEED INSTABILITY.
Consequence
IF NOT IDENTIFIED AND CORRECTED, ENGINE SPEED CONTROL COULD BE LOST DUE TO RIVET DISENGAGEMENT.
Remedy
CATERPILLAR IS CONDUCTING THE NOTIFICATION AND REMEDY FOR THIS RECALL. DEALERS WILL INSPECT THE CONTROL ASSEMBLY AND REPLACED IF NECESSARY.
OWNER NOTIFICATION IS EXPECTED TO BEGIN DURING JULY 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT CATERPILLAR AT 1-309-675-5658. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Engine and engine cooling: Cooling system: Fan04/13/199999V078000
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCKS ASSEMBLED BY EITHER VOLVO GM HEAVY TRUCK CORPORATION OR VOLVO TRUCKS NORTH AMERICA, INC., AND WITH A 2,100 RPM DETROIT SERIES 60 ENGINE, AND A 32 INCH, 8 BLADE KYSOR ENGINE COOLING FAN. THE BLADES MAY SEPARATE FROM THE ENGINE COOLING FAN ASSEMBLY DURING FAN OPERATION AND FULL ENGINE RPM.
Consequence
THIS CONDITION POSES A HAZARD TO ANYONE WORKING OR STANDING IN THE AREA OF THE ENGINE COOLING FAN WITHOUT WARNING WHEN THE HOOD IS OPEN.
Remedy
DEALERS WILL REPLACE THE FACTORY INSTALLED ENGINE COOLING FAN.
OWNER NOTIFICATION BEGAN APRIL 23, 1999.OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT VOLVO TRUCKS AT 1-800-528-6586. ALSO CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-888-DASH-2-DOT (1-888-327-4236).
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
