THE BRAKE PEDAL ASSEMBLY HAS A PUSHROD PIN THAT IS TOO SMALL AND IT IS INSTALLED IN THE WRONG POSITION, CAUSING AN INCREASED BRAKE PEDAL RATIO AND A DECREASED MASTER CYLINDER STROKE.
Consequence
THE REDUCED MASTER CYLINDER STROKE RESULTS IN FAILURE TOMEET THE PARTIAL SYSTEM FAILURE REQUIREMENTS OF FMVSS 105, "HYDRAULIC BRAKESYSTEMS". A FURTHER REDUCTION IN BRAKING ABILITY AT A TIME WHEN PARTIAL SYSTEMFAILURE HAS OCCURRED COULD RESULT IN A VEHICLE CRASH.
Remedy
REPLACE THE BRAKE ASSEMBLY.
SYSTEM: BRAKES: BRAKE PEDAL ASSEMBLY; FMVSS 105.VEHICLE DESCRIPTION: VANS EQUIPPED WITH VACUUM POWER BRAKES.NOTE: FMVSS 105 REQUIRES THAT HYDRAULIC BRAKE SYSTEMS HAVE AN EMERGENCY FEATUREWHICH STOPS THE VEHICLE UNDER SPECIFIED CONDITIONS. ALL HYDRAULIC BRAKE SYSTEMSARE DESIGNED WITH A SPLIT SYSTEM. EACH SPLIT WORKS INDEPENDENTLY FROM THE OTHER.THE PARTIAL SYSTEM FAILURE TEST OF THE FMVSS IS PERFORMED WITH ONE OF THE SPLITSYSTEMS INOPERATIVE.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.