NHTSA lists 5 model-level recall records for this year, make, and model. These records may apply to your vehicle; confirm your specific VIN with NHTSA or the manufacturer.
Recall records
Service brakes, hydraulic: Foundation components: Hoses, lines/piping, and fittings10/14/199292V148000
ON 1987 THROUGH EARLY 1990 MODELS, BOTH FRONT BRAKE HOSES CAN WEAR DUE TO DIRECT CONTACT WITH THE WHEEL OPENING SPLASH SHIELDS. ON THE LATE 1990 THROUGH 1992 MODELS, PERIODIC RUBBING CONTACT OF THE LEFT FRONT BRAKE HOSE CAN OCCUR DUE TO MOVEMENT OF THE SPLASH SHIELD IN CERTAIN VEHICLE OPERATING CONDITIONS.
Consequence
EITHER CONDITION CAN CAUSE LOSS OF FRONT BRAKE SYSTEMFUNCTIONS, RESULTING IN INCREASED STOPPING DISTANCES AND AN INCREASED RISK OFVEHICLE ACCIDENT.
Remedy
THE 1987 TO 1990 MODEL VEHICLES WILL HAVE BOTH SPLASH SHIELDS REPLACED AND BOTH FRONT BRAKE HOSES REPLACED AS NECESSARY. ALL AFFECTED LATE 1990 THROUGH 1992 MODEL YEAR VEHICLES WILL HAVE ADDITIONAL FASTENERS INSTALLED TO FURTHER SECURE THE LEFT SIDE SPLASH SHIELD. ALSO, THE LEFT FRONT BRAKE HOSE WILL BE INSPECTED AND REPLACED AS NECESSARY.
WINDSHIELD FRAME METAL MAY CRACK AT THE WIPER ARM PIVOT MOUNTINGS DUE TO METAL STRESS DURING WIPER OPERATION.
Consequence
THIS CAN CAUSE DISLOCATION AND BINDING OF THE WIPERSYSTEM LINKAGE WHICH, IN INCLEMENT WEATHER, COULD AFFECT DRIVER VISIBILITY ANDRESULT IN AN ACCIDENT.
Remedy
RETROFIT WITH A WINDSHIELD FRAME REINFORCEMENT AT THE WIPER PIVOT LOCATIONS AND REDESIGNED LINKAGE COMPONENTS TO REDUCE STRESS AT THE PIVOT MOUNTINGS.
SYSTEM: VISUAL; WINDSHIELD FRAME AND WIPER LINKAGE.VEHICLE DESCRIPTION: MULTI PURPOSE VEHICLES.NOTE: THIS RECALL IS CONTINUED IN NHTSA RECALL 93V150000. THE MANUFACTURERBEGAN INCLUDING A WINDSHIELD FRAME REINFORCEMENT IN ITS VEHICLE PRODUCTION AS OFOCTOBER 13, 1988. 1989 MODELS PRODUCED BEFORE OCTOBER 13, 1988 ARE ELIGIBLE FORTHIS RECALL.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
VEHICLE DESCRIPTION: MULTIPURPOSE PASSENGER VEHICLES EQUIPPED WITH PLASTIC FUEL TANKS. THE FUEL TANK SENDING UNIT GASKET CAN CRACK CAUSING FUEL AND FUEL VAPOR LEAKS.
Consequence
FUEL AND FUEL VAPOR LEAKED FROM THE FUEL TANK CAN RESULT IN FIRE WHEN EXPOSED TO A SOURCE OF IGNITION.
Remedy
REPLACE THE FUEL TANK SENDING UNIT GASKET.
IF YOUR VEHICLE IS PRESENTED TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND THE REMEDY IS NOT PROVIDED WITHIN A REASONABLE TIME AND FREE OF CHARGE OR THE REMEDY DOES NOT CORRECT THE DEFECT OR NONCOMPLIANCE, PLEASE CONTACT CHRYSLER SERVICE CENTER AT 1-800-853-1403. ALSO, CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S AUTO SAFETY HOTLINE AT 1-800-424-9393.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Wheels: Lugs/nuts/bolts/studs05/02/198686V058000
THE WHEEL LUG NUTS MAY HAVE BEEN IMPROPERLY TIGHTENED. ALSO, THE STEERING SHAFT CLAMP BOLTS MAY NOT BE PROPERLY TIGHTENED. CONSEQUENCE OF DEFECT: IMPROPERLY TIGHTEN WHEEL LUG NUTS MAY CAUSE THE LUGS TO BREAK AND EVENTUALLY RESULT IN THE WHEEL FALLING OFF. IMPROPERLY TIGHTEN STEERING SHAFT CLAMP BOLT MAY CAUSE COMPLETE LOSS OF STEERING ABILITY. EITHER OF THESE CONDITIONS COULD RESULT IN A LOSS OF STEERING CONTROL AND A CRASH COULD OCCUR WITHOUT PRIOR WARNING.
Remedy
PROPERLY TIGHTEN BOTH WHEEL LUG NUTS AND STEERING SHAFT CLAMP BOLTS.
