NHTSA lists 4 model-level recall records for this year, make, and model. These records may apply to your vehicle; confirm your specific VIN with NHTSA or the manufacturer.
Recall records
Seat belts07/10/198787V102000
FASTENERS USED TO ASSEMBLE THE D RING ANCHORAGE FOR THE SHOULDER HARNESS MAY NOT PROVIDE SUFFICIENT STRENGTH TO MEET SPECIFIED LOAD REQUIREMENTS OF FMVSS 210.
Consequence
TRUCKS DO NOT COMPLY WITH FMVSS 210.
Remedy
REPLACE MONOBOLT FASTENERS WITH HIGH CLAMP 1/4 IN BLIND RIVETS.
SYSTEM: SEAT BELTS/FMVSS 210.VEHICLE DESCRIPTION: 120 FT LONG CONVENTIONAL TRUCKS EQUIPPED WITH OPTIONALTYPE 2 SEAT BELT ASSEMBLIES.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Seat belts: Front: Retractor03/13/198787V032000
SEAT BELT MOUNTING BRACKET STRENGTH MAY BE BELOW REQUIREMENT OF FMVSS 209 AND COULD CRACK.
Consequence
SEAT BELT MAY NOT PROPERLY RESTRAIN OCCUPANT; ALSO,VEHICLES DO NOT COMPLY WITH FMVSS 209.
Remedy
REPLACE 3 POINT SEAT BELT RETRACTOR MOUNTING BOLT 601-B BRACKETS.
SYSTEM: SEAT BELT RETRACTOR MOUNTING BRACKETS/FMVSS 209.VEHICLE DESCRIPTIO: CAB OVER ENGINE AND LONG CONVENTIONAL TRUCKS.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
Suspension: Rear: Springs: Leaf spring assembly: Hanger/bracket02/19/198787V019000
WELDS JOINING THE AXLE SUPPORT BRACKET TO THE REAR DRIVE AXLE MAY BE DEFECTIVE DUE TO INSUFFICIENT COVERAGE AND/OR PENETRATION.
Consequence
WELDS COULD FAIL, RESULTING IN REAR AXLE SEPARATING FROMTHE SUSPENSION.
Remedy
REMOVE EXISTING WELDS AND REWELD BY A CERTIFIED WELDER.
SYSTEM: AXLE SUPPORT BRACKET WELDS.VEHICLE DESCRIPTION: HIGH COE AND LONG CONVENTIONAL TRUCKS EQUIPPED WITH TANDEMDRIVE HENDRICKSON SUSPENSIONS AND EATON AXLES.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
THE CENTRAL TUBE PART OF THE DRAG LINK, WHICH IS SET IN A ROTATIONAL POSITION, DOES NOT HAVE ENOUGH CLEARANCE BETWEEN THE NUT OR BOLT HEAD AND THE AXLE BEAM. CONSEQUENCE OF DEFECT: THERE COULD BE INTERFERENCE DURING A RIGHT TURN WHEEL CUT AND MAY CAUSE THE STEERING LINKAGE TO BIND, LEADING TO THE LOSS OF STEERING CONTROL AND AN ACCIDENT.
Remedy
REPLACE ADJUSTABLE DRAG LINK WITH AN ASSEMBLY ON WHICH ONLY THE FORWARD END IS ADJUSTABLE. ALSO, STAKE REAR END.
SYSTEM: STEERING. VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS FITTED WITH A MODEL GKN120 FRONT AXLE.
Your record
What is the status for your vehicle?
Check your exact VIN before marking whether this recall applies.
Saved only in this browser. Recall You Later does not receive this information.
