1982 Mack CF recalls

THE SPLINED STEERING SHAFT MAY NOT BE SUFFICIENTLY ENGAGED AS DESIGNED DUE TO INACCURATE DRILLING OF THE HOLES IN THE FRAME TO WHICH THE CAB FRONT MOUNT MEMBER IS BOLTED. UNDER CERTAIN CONDITIONS THE STEERING SHAFT MAY DISENGAGE. CONSEQUENCE OF DEFECT: A JARRING IMPACT MIGHT CAUSE DISENGAMENT OF THE SPLINED SHAFT RESULTING IN LOSS OF STEERING CONTROL AND POSSIBLY AN ACCIDENT.

Remedy

REPLACE SHAFTS WHICH MEASURE UNDER THE MINIMUM ENGAGEMENT DIMENSIONS WITH LONGER SHAFT.

SYSTEM: STEERING SHAFT. VEHICLE DESCRIPTION: FIRE TRUCKS.

STRESSES IMPOSED ON THE LEVER DURING TURNING MANEUVERS AND/OR IMPACT INCIDENTS, SUCH AS WOULD BE CAUSED BY CURBS OR ROAD SURFACE IRREGULARITY, REDUCE THE LIFE EXPECTANCY OF THE PART. THE STEERING LEVER MAY CRACK AND EVENTUALLY THE STRESSES COULD CAUSE THE STEERING LEVER TO BREAK.

Consequence

A BROKEN STEERING LEVER WILL CAUSE LOSS OF STEERINGCONTROL WITHOUT PRIOR WARNING WHICH MAY RESULT IN A VEHICLE CRASH.

Remedy

REPLACE THE DEFECTIVE STEERING ARMS.

SYSTEM: STEERING LEVERS.VEHICLE DESCRIPTION: CF MODEL FIRE CHASSIS WITH GROSS AXLE WEIGHT RATINGS OF12,000 POUNDS OR GREATER AND EQUIPPED WITH POWER STEERING.NOTE: THE SPECIFIC MACK AXLES AFFECTED ARE: FA532, FAF532, FAFW537, FAFW5372,FAFW13.5, FAW538, FAW14.3, FA604, FA6042, FAW616, FAW618, FAW617, AND FAW20.

SPRING SEAT CAN DEFORM, WHICH CAUSES A DECREASE IN THE CLAMPING FORCE IN THE SUSPENSION ASSEMBLY. LOSS OF CLAMPING FORCE MAY BRING ABOUT AXLE MISALIGNMENT OR AXLE HOUSING FAILURE.

Remedy

THE AXLE HOUSING WILL BE INSPECTED AND REPLACED, IF NECESSARY. THE SPRING SEATS WILL ALSO BE REPLACED.

VEHICLE DESCRIPTION: HEAVY TRUCKS.SYSTEM: SUSPENSION; REAR SPRING SEAT.CONSEQUENCES OF DEFECT: LOSS OF VEHICLE CONTROL COULD OCCUR WITHOUT WARNING,POSSIBLY RESULTING IN AN ACCIDENT.